Second dumb question of the month coupon

SteveB · 2008-05-07T07:00:16+00:00

I know I already used one coupon this month, so sue me.I bought an old SA 200 welder with a 1.75 kw rated plug for tools. This is stated in the Lincoln download manual. The current available is 15 amps, per manual.I am interested if I can run a 110v. Lincoln 140 MIG on that circuit. The required amperage at FULL LOAD is 20 amps. I do not see any breakers on the SA 200, so don't know what type of protection they have on there if a larger than acceptable load is put on that circuit. Also, there are two plugs on the machine. Any way to wire the two together to up the amperage? (maybe that's the third dumb question ...........)Can I just use a tester and check the voltage and amperage on those plugs with the machine running? For the electricital whizzes out there, what does 1.75 kw convert to in layman's terms?Could I use this intermittently on a very short duty cycle for wrought iron repairs, or even look for a smaller machine that has less current draw? Is there such a thing? This would be for small .065" tubing repairs.If absolutely necessary, I can use the DC part of the welder and 3/32" 6011 DCSP.Steve

May 07, 2008 25 Replies

Rate this thread:

Private 18 years ago

Thanks for the excelent link, I stand corrected.

Vote

Bruce in Bangkok 18 years ago

formatting link

Fleetweld 35 E6011 AC, DC+, DC- Operators consistently give this electrode high marks. This quality Lincoln product is a proven performer for AC pipe welding applications and sheet metal welding. Fleetweld 35 is a great electrode to use on jobs where the steel isn?t clean.

Fleetweld 180 E6011 AC, DC+, DC- Got a small AC welder? Here's your electrode! Fleetweld 180 offers excellent arc stability for excellent performance with power sources as low as 50V open-circuit voltage (OCV). A great stick electrode with the ability to start easily on low open circuit voltage welders.

Bruce-in-Bangkok (correct Address is bpaige125atgmaildotcom)

Vote

Ignoramus4557 18 years ago

I have a Lincoln LN-25 wirefeed, which gets power from the welding leads, with one used gun and one brand new gun. price $700

Vote

johnnytorch 18 years ago

That's a decent deal with two guns. Only problem is that its just a CC machine. I think that it would work for higher current applications, but he's wanting to use it for ornamental thin stuff.

I haven't ever used a wire feeder on a CC machine, so this is based purely on what I have read. The LN25 is a good machine.

Vote

johnnytorch 18 years ago

The SA-200 that is.

Vote

Ignoramus4557 18 years ago

LN-25 is made to run on CC machines, it is variable speed.

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required