C47 colours

Feb 11, 2005 7 Replies

Hi all - I'm building an R/C C47 model to take part in a 60th anniversary of VE day celebration (see

formatting link
modelling it on one of the aircraft of the 315th Troop Carrier Group that was based at Spanhoe



1944/45. I have access to several contemporary photos, but they're all black and white. While this is OK for the invasion stripes :-) can anyone help with the correct upper and lower surface colours? It's a large model (82inch span) so Humbrol tinlets won't be enough, but if there are appropriate Humbrol or similar colours I can use them to colour match larger quantities. TIA, David


correct upper and lower surface colours?

Upper surfaces were all olive drab. I am at work or would give you the mil spec shade number. The under surface was dove gray. Again, I don't have the mil spec. Maybe someone reading this has the shade numbers for you.

Thanks Kjell, very impressive.

Oh - and - er - can anyone help with the zinc chromate primer type colour that I am assuming would be visible in the wheel wells and flap bays? Is Humbrol cockpit green anywhere near or too dark? I dimly remember reading somewhere that British and American aircraft have different greeny/yellow colours in cockpit interiors etc.

Thanks again, David

The Brit green is darker. The chromate has more yellow in it. You could try mixing your own from green and yellow. You should be able to get pretty close.

YOu may be able to buy the zinc chromate spray in an auto paint store. Available here in Canada at CTC. Gord MAAC6694

"David Williams" wrote in message news:42125b94@212.67.96.135...

Thanks for confirming what I thought Paul.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required