Anybody know which OS carb will be a drop in replacement for the OS .91FX remote needle valve.
Call me crazy, I want the needle on the carb.
Thanks Don
Anybody know which OS carb will be a drop in replacement for the OS .91FX remote needle valve.
Call me crazy, I want the needle on the carb.
Thanks Don
Measure the base diameter and bore diameter and I'll see if any GMS carb fits.
Well, I don't have the engine yet. I was hoping somebody had done this already so I could order the carb at the same time.
Thanks Paul. Don
Perry Pumps Product Page will list a drop-in Perry carb for this engine.
Actually, it doesn't list that particular engine. However, I have found that the stock remote carb is 15mm with a 9.5mm opening. The OS carb from the 90FSR and 1.08FSR is 15mm with 11mm opening.
I had looked at the Perry carbs and will probably go with that option considering they are less expensive.
Thanks, Geoff Don
Perry Pumps Product Page will list a drop-in Perry carb for this engine.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.