9 " South Bend Lathe Quick Change - Gear Question - Help!

Ok - I changed my gearing around on my 9 Inch South Bend lathe to do
some weird threading.
Now - I am having troubles changing it back.
Can anyone tell me what gears are in line coming out of the Tumbler
Reverse down to the Lead Screw?
The Lead screw should be 20T or 40T depending on what pitch you need to cut.
I don't have the legend plate for the gear train - only the thread pitches.
There is a 56T, and a 72T, also the extra 40T gear.
Anybody know what should be the stud gear? then the rest in the gear
train to the leadscrew?
Better Yet - anybody have a picture of the original plate that I can
print out and keep by the lathe?
(Ok - I should have written this all down, but.................)
(blame it on beer, that's all I can say........)
Thanks for the help!
Slightly Embarassed Joe
Reply to
Joe Comunale
Loading thread data ...
See the pic of the lathe I am selling -
formatting link
Ted
Reply to
William E. Williams III

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.