Air Hammer Chisels

I have a really stupid question.

In the following air hammer chisel kit:

formatting link
They list that you get 10 chisels including ones for:

Rivet Cutter Bushing Splitter

3/4" Flat Chisel Muffler Cutter Straight Punch Tapered Punch Nut Splitter Panel Cutter Dual Blade Panel Cutter 1" Hammer.

While the 1" hammer and the punches are obvious, how do you know which to use for muffler cutting, nut splitting, or rivet cutting? They aren't labeled as such and I could see multiple chisels working in many of those circumstances.

. __________________ Note: To reply, replace the word 'spam' embedded in return address with 'mail'.

Reply to
Barry S.
Loading thread data ...

The muffler cutter is the fourth one from the right- it has a tee shape. The blade is wedged between the muffler inlet or outlet collar

-it cuts a neat 1/8 inch slot in the collar allowing the muffler to slip off. The muffler can then be clamped onto new pipe.

-Carl

Reply to
Carl Byrns

In that picture going from left to right

Rivet cutter, 3/4 chisel, straight punch, tapered punch, panel cutter, bushing splitter, muffler cutter, nut splitter, dual blade panel cutter, hammer.

Reply to
Steve W.

Of course, it's all moot if nuthin is properly hardened. :)

Reply to
Proctologically Violated©®

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.