Here are the pictures of the bad seal and the valve. Do the seals look like common items?
- posted
13 years ago
Here are the pictures of the bad seal and the valve. Do the seals look like common items?
There is one advantage..that rod everything is mounted on comes apart and you can machine a replacement seal fairly easily on your lathe.
Just use razor sharp positive rake HSS tooling.
Gunner
If you can find a local place that sells pneumatic components you can likely just bring the spool down and they can find you the correct parts. If you want to replace the whole valve, McMaster seems to have suitable replacements for
Take a look here..
A lot less than $100 !!
You have to register to see the prices, something about them contractually obligated to not let them be "Public".
But, as I said, a lot less than $100, for a generic two way valve.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.