⏣ General Metalworking

30777 Threads Posts
to

question about color code paint on steel

Yesterday I drove around getting scrap steel: 50 pounds of 3/8" x 4" x L" for 25 cents/ pound, that is painted red on t...
4 comments posted 21yrs
posted by c.magnuson
4 comments posted 21yrs posted by c.magnuson

For Glenn Ashmore 1" rods

Glenn Awhile back you asked a question looking for some 1" rod. How did the project work out and what was the final solu...
5 comments posted 21yrs
posted by lnjgalvinNOSPAM
5 comments posted 21yrs posted by lnjgalvinNOSPAM

I need a favour/help from a UK metal turner

I'm looking to get some "dust caps" made for the sockets on my car. These sockets are on the roof posts and are for the...
3 comments posted 21yrs
posted by Gadgetfreak2000
3 comments posted 21yrs posted by Gadgetfreak2000

Surface Grinder & Tooling f/s

amw 6 x 18 manual surface grinder(ball bearing ways).Features 2hp motor,overhead dresser,worklamp,good condition.Also i...
7 comments posted 21yrs
posted by CANINEBRACE
7 comments posted 21yrs posted by CANINEBRACE

Fibreglassing 101?

I need to make a couple of horns ( for audio use ) and have a couple of questions as I never worked with this stuff bef...
35 comments posted 21yrs
posted by Q
35 comments posted 21yrs posted by Q

South Bend Lathe threading questions

I have some South Bend 16" Lathe threading questions. I have the book on running the lathe but still have some question...
5 comments posted 21yrs
posted by gts
5 comments posted 21yrs posted by gts

today's catch

went to a factory today that was liquidating due to lack of profits. It was not an auction, I spent a while there with...
3 comments posted 21yrs
posted by ignoramus24005
3 comments posted 21yrs posted by ignoramus24005

Sidewalk Sale finds

At a buck a book, how could I refuse? The untitled one is "Machine Shop Operations" , American Technical Society. There...
3 comments posted 21yrs
posted by notta
3 comments posted 21yrs posted by notta

cutting out 4" circles of 1/8" mild steel plate

I have a need for some 4" circles of 1/8" steel. They have to be pretty flat. They will wind up with a central hole of...
15 comments posted 21yrs
posted by grant
15 comments posted 21yrs posted by grant

Anyone need Harley Exhaust pipes

I was helping a machine tool dealer close down his business over the last couple weeks (Dimension Tooling, Santa Ana, C...
43 comments posted 21yrs
posted by gunner
43 comments posted 21yrs posted by gunner

Pyrethrin thermal fog & sprayer OT

I know I don't have to inform most that it's mosquito season once again. My porch is swarming so that I can't come in t...
17 comments posted 21yrs
posted by jok18
17 comments posted 21yrs posted by jok18

OT - ICE - A very good idea

This is such a good idea that I thought it was worth sharing. I was watching the news today and they talked about this...
7 comments posted 21yrs
posted by notreal at nowhere dot com
7 comments posted 21yrs posted by notreal at nowhere dot com

OT: Alarm system motion detector

I'm still getting broken into almost every weekend again and the thieves only get the employee's food in the refrigerat...
69 comments posted 21yrs
posted by tom(nospam)
69 comments posted 21yrs posted by tom(nospam)

Made some rubber toroids

I hadda make twenty rubber toroids. The material is neoprene 70 durometer Shore A. Pretty stiff. The dimensions are 1.3...
8 comments posted 21yrs
posted by etpm
8 comments posted 21yrs posted by etpm

San Fernando Cali- Who wanted the air compressor?

I chatted with someone about air compressors in the last few days, and they indicated they wanted one for the garage of...
1 comments posted 21yrs
posted by gunnerNOSPAM
1 comments posted 21yrs posted by gunnerNOSPAM