⏣ General Metalworking

30778 Threads Posts
to

NAMES Expo (Updated 24 Jan 2005)

A reminder. The 16th Annual North American Model Engineering Society (NAMES) Exposition When April 23-24, 2005 Hours Sa...
0 comments posted 21yrs
posted by ssl
0 comments posted 21yrs posted by ssl

stainless steel restoration

Hello, I've got a countertop here that's got some problems. It appears to be stainless steel, but there seems to be a b...
5 comments posted 21yrs
posted by stretchoutandwait
5 comments posted 21yrs posted by stretchoutandwait

does anyone want an Ipod?

http://www.freeiPods.com/?r=14249501 Just go here to get started. It's simple. You just need to participate in just one...
1 comments posted 21yrs
posted by drummmachine
1 comments posted 21yrs posted by drummmachine

Flashlight Faceplate?

Does anyone know of a company that would make a custom plate like for a flashlight or something. Like the BatSignal, bu...
3 comments posted 21yrs
posted by drbravo2
3 comments posted 21yrs posted by drbravo2

Refrigeration mineral oil -- OK for what else?

I have an unopened quart of NAPA #209500 mineral oil for old car air conditioners that use Freon R-12. I can't find any...
10 comments posted 21yrs
posted by larrymoencurly
10 comments posted 21yrs posted by larrymoencurly

Question about Millermatic 200 MIG welders

I'm attending an auction this week and they have 8 Millermatic 200's and 8 Millermatic "Vintage" welders. Each welder c...
4 comments posted 21yrs
posted by cog4150
4 comments posted 21yrs posted by cog4150

Epoxy paint on shop floor---Any good?

I am going to paint my shop (garage) floor with epoxy paint. Rustolium sells two grades, "Garage floor paint epoxy " an...
17 comments posted 21yrs
posted by <>
17 comments posted 21yrs posted by <>

coolant/lubricant for machining acrylic?

OK, not really metal-related, but I need to machine some acrylic stock and was wondering what a good coolant or lubrica...
4 comments posted 21yrs
posted by puckerprune
4 comments posted 21yrs posted by puckerprune

Acquiring used propane tanks

Just thinking about calling up a couple local propane retailers and asking for old tanks that are no longer certified....
4 comments posted 21yrs
posted by cmciver
4 comments posted 21yrs posted by cmciver

Tape Measure Rip Off

I think a customer ripped my itsy bitsy numbered tape measure. I kinda liked the size , retraction button , and laughin...
4 comments posted 21yrs
posted by mattsonsolar
4 comments posted 21yrs posted by mattsonsolar

shop design software

It looks like I'll finally be building a shop/garage come spring. (hurray... 2 yr w/o a shop) Anyway I'm looking for re...
10 comments posted 21yrs
posted by andrewvNO
10 comments posted 21yrs posted by andrewvNO

How much slope should I put in a roof?

Im at the point where Im getting ready to put a roof on my "awning" in the back yard. Its a 16' x 16' freestandinging g...
20 comments posted 21yrs
posted by gunner
20 comments posted 21yrs posted by gunner

WTB "Eddy Current Tester

A customer called me today looking for what he called an Eddy Current tester. As he described it to me, its a device th...
6 comments posted 21yrs
posted by gunner
6 comments posted 21yrs posted by gunner

bed frame iron

Over the years I've heard it asserted many times that bed frame iron is real low-grade steel. Well, with steel prices s...
10 comments posted 21yrs
posted by grant
10 comments posted 21yrs posted by grant

steel crossbow prod

Does anyone got cad drawings for a steel crossbow prod with a draw weight of 230 lbs, and draw lenght of 8 inces ? haak...
0 comments posted 21yrs
posted by nkrbjhvee
0 comments posted 21yrs posted by nkrbjhvee