thermoplastic polyurethane with high melt flow index

I'm looking for TP=DC with a high MVI > 80 cc/10 min (@160 =B0C/2.16 kg).
If possible the polymer must also have some elongation. And must have
some restance to hydrolysis
Reply to
Dummy
Loading thread data ...
I'm looking for TPÜ with a high MVI > 80 cc/10 min (@160 °C/2.16 kg). If possible the polymer must also have some elongation. And must have some restance to hydrolysis
Suggest you talk to Merquinsa - they have a range of caprolactone based TPU's so they offer good hydrolysis resistance.
Colin
Reply to
Colin Reed
Do you have only this information? no hardness or type of processing.
Best regards Dummy schrieb:
Reply to
michael
The TPU must be soluble in solvent or waterbased.
The hardness (shore) is not that important. I'm just looking for polymer with a high melt volume index 80 ccm/10 min at 160=B0c, 2.16 kg. so this means that the melting point is also low. Ohter parameters are not that important
Reply to
Dummy

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.