1. Home
  2. PRO/Engineer (Creo) discussions
  3. Line colour

Line colour

Loading thread data ...
: Is it possible to assign different line colours to different components in : an assembly drawing? : I'm using Wildfire.
Sure and this isn't even new to Wildfire. Select the view, RMB Properties, go to View Display. At the bottom of the list you'll see that Drawing Color is probably selected. This is the default. Change it to Model Color and the component colors from the assembly will be used for the object lines.
David Janes
Reply to
David Janes

Site Timeline

Related

  • different colours for different instances

  • Hello,Any ideas to give different colours for different instances of a part with...

  • Re: different line weights in different layouts

  • you need to use a different pen able for the different layout that instructs the...

  • South Korea 380V Power line colour code

  • Appreciate if anyone can help me. I am looking for information on colourcode...

  • Construction Line Colour?

  • How do I change the construction line colour on the model (not sure ofthe...

  • G19 different for Fanuc?

  • I've used G17,18,19 on several controls... They all act exactly like...

  • Btu's per Pound to melt different metals?

  • I've been casting for a while off a friend's blacksmiths forge usingcoke...

  • Portable Line Boring

  • I'm seeking thoughts, insight, tips or tricks relating to portable line...

  • Telephone line adaptor (-24v to -48V)

  • Hi all,I am in the need for a telephone line adaptor that will convert a...

  • How much fire clay to line rivet forge pan

  • I'm new to this and I've managed to obtain a rivet forge to ruin...

  • Stick welding with Maxstar 140 - is polarity different?

  • I was getting ready to do some stick welding with 7018 rod, using myMaxstar 140...

  • Back to the Penn Line Atlantic

  • Well, I got the whole thing assembled, and decorated, and it lookedbeautiful......

  • How to meassure the pressure different of different environment.

  • Our company intend to build a clean room with possitive pressure in theroom.We...

  • Farmall Cub line drawing

  • One of my students wants to make a clock for his uncle who owns aFarmall Cub...

  • Snap-Flo vs Loc-Line

  • Is there much of a difference in the quality of Snap-Flo versus Loc-Linebrand...

  • Advantages to different air coupling types?

  • The turn-slide-turn is Dynaquip, where it depressurizes the downstream...

  • Assigning different materials to a single part

  • Is it possible to assign different materials to each body in a multi-body...

  • Any Homemade line boring equipment?

  • Anyone make their own line boring bar/equipment? It doesn't look that hard...

  • Spline to Poly line?

  • is it possible?

  • icon to change to another line ?

  • hi there,i 'm using AC light 2002, how can i make icons that enables me to...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.