[Q] After future-ing

Oct 15, 2003 6 Replies

I've read all about using future to gloss a model etc but lets say for some wierd reason one wants to REMOVE future after its dried and cured, maybe to repaint the model or ??? - How to do, or can you?



An ammonia based cleaner should do the job. That's what Johnson's recommend to remove the floor wax.

Bill Shuey

Isn't Future basically just clear acrylic?Would the ammonia work after it had cured?Or would he have to use one of the various paint removers? If I wanted to do a repaint I'd probably take off the paint under the future anyhow.

Windex works great, and it's cheap. Other chemicals that would work are isopropyl alcohol, denatured alcohol (will remove even dried Acyl under the Future...) , and just about any polishing compond that contains petroleum distilates. Frank

ammonia will take it right off, generally without affecting the paint underneath.

I have used Windex (ammonia-based glass cleaner) to remove a botched application of Future-- it was easy!

Unless you have thick globs of Future that you want to remove, you can always cancel the effect of the Future simply by applying a flat coat over it, rather than taking the chance of wrecking the paint job by trying to strip it. I used to feel cheap 'cause I had no signature.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required