One of my assemblies does not appear on the screen. All the parts and sub-assys are visible if opened separately from within the main assy.
Everything is "resolved" and "shown" correctly. I had something similar happen a while ago but it re-appeared when SW was re-booted and the assembly re-loaded. This time I just can't find the problem.
Thanks in advance! Jonathan
SW2007 SP5.
Hi Jonathan, not shure if you also checked the folders where multibody parts are seperately shown. If not try the following.
- open assembly
- check the "solid bodies" folders of every part in the feature tree.
- make shure "show solid bodies" is checked on each part and configuration
HTH
Jojo
"jonathan rees" schrieb im Newsbeitrag news: snipped-for-privacy@pipex.net...
It wasn't that, but thanks for the suggestion!
I've now recovered a previous issue of the assy off a tape and it works OK. We've got 4 seats/users here and nobody has any idea what was up with this file!
Rgds, Jonathan
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.