Is there a way to use the center of mass coordinates to create a point (that would become evantually a sphere) that will be dynanically updated (new CG) each time that the geometry of my part or solid bodie would change? Thanks for your help.
Do a google search on this user group. Type in "CG Macro" and you will several different versions. They should provide for the basis for further customization if they don't do what you want.
Open this and start suppressing features to see the CG update. The macro and the model must be in the same folder, and of course you'll need to be running SW2003 or newer version of SolidWorks, because it uses the Macro Feature capability. BTW, I would love to give credit to whoever wrote this macro but I got it from someone else, and there's no name in the macro. So if you're reading this and this is your macro, thank you, I've benifited from it.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.