1. Home
  2. Solidworks CAD Design software
  3. fasten two parts with curved surface

fasten two parts with curved surface

I need to install socket head cap screws to bolt together two parts. The
outer surface is curved.
How do I?:
Use the hole wizard to put the necessary features in both parts?
Make the feature in the curved part perpendicular to the second part?
Thanks!
Reply to
dlevy
Loading thread data ...

Site Timeline

Related

  • laser level for line on curved surface?

  • I think a small laser level would help me a lot, but I'm not sure. Let's...

  • Boring Holes into Curved Surface

  • Imagine a cylinder, but cut in half so that the cross section of the object...

  • counterbore wizard on curved surface?

  • I have a curved surface that I would like to insert counterbored holes using the...

  • Shallow cut perpendicular to curved surface

  • Hi all, How would I make a thin (say 15 thou) indentation into a curved face?If...

  • Engraving on a Curved Surface

  • HELP!!I'm trying to engrave text on the external surface of a short piece...

  • Pattern a extruded surface around a multi curved surface

  • I am trying to pattern a extruded "flight" around a curved belt. Theflight is a...

  • Creating a sweep on a curved surface

  • What is the best way of creating a swept geometry along the perimeter of a...

  • Merge boundaries of two parts

  • Hello, I have two solids that are defined by trimmed NURBS surfaces....

  • Hole Wizard flips direction on curved surface

  • I am using (in 2006SP4.1) a Hole Wizard to create 6 CSK M5 holes on a slightly...

  • Mathmatical Relations Between Two Parts

  • Hello,I'm new to SolidWorks comming from Pro/E.In Pro it was possible to...

  • surface normal

  • Hi,I have an STL model (or a VRML model) that its surface normals are...

  • Surface Plate techniques

  • I have a Starrett precison level I think is not perfectly flat on thebottom.What...

  • fasten planks to frame

  • When the horrible heat breaks, I need to put a new wood deck on my oldtruck. I...

  • can ANSYS create the fillet region between two curved surfaces?

  • Dear all,I am creating a solid model of a centrifugal compressor impeller. Ihave...

  • curved text....?

  • Depending on "how curved" it is you can use one of two methods:- offset from...

  • Curved Points

  • I have been planning a layout for my loft with no 2 and no 3 radiuscurves...

  • Easy ways to make money with an "automatic surface grinder"

  • Don't know anything about that machine size-wise, but about the most common ...

  • problem with knit surface

  • Hey everybody!I'm having a hard time with knit surface and I need your...

  • Splitting of BOM into two parts

  • Hello,I have a large BOM which does not fit on a A4 sized sheet. Therefore I...

  • curved helix?

  • Has anyone out there ever tried to create a curved helixAny thoughts would be...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.