1. Home
  2. Solidworks CAD Design software
  3. REALLY really upset!!!!!!

REALLY really upset!!!!!!

Ok, I have bee using sw2005 sp1.0 for 8 hours now and not one crash!!! Grrr...... The time it took to restart the PC and get sw2004 sp4.2 going again, I could grab a coffee and a natter, but now it looks like I will have to work more, booohoo.... I even tried an assembly that always crashes after an hour's use with 2004 and that didn't crash my system either, Aaahhhh!!!!

Basic home pc Compaq P4 2.8 Nvidia 5700

1Gb DDR 120Gb Sata 7200 40Gb Ide 7200 19" crt 100Mb Lan

Hope this will be the same on my work pc Compaq P4 2.8 Nvidia 900 xgl

2Gb DDR 2x WD Raptor 74Gb 10,000 raid 0 2x WD Raptor 74Gb 10,000 raid 1 2x 120Gb Ide 7200 1x 20" crt 1x 19" Lcd 1000Mb Lan

Enhancement request is being sent to sw corp, bring back my crashes!!!! :-s

Reply to
pete
Loading thread data ...

Sp 5.0 of 2004 seems to be quite a bit more stable also. I feel your pain.

Corey

Basic home pc Compaq P4 2.8 Nvidia 5700

1Gb DDR 120Gb Sata 7200 40Gb Ide 7200 19" crt 100Mb Lan

Hope this will be the same on my work pc Compaq P4 2.8 Nvidia 900 xgl

2Gb DDR 2x WD Raptor 74Gb 10,000 raid 0 2x WD Raptor 74Gb 10,000 raid 1 2x 120Gb Ide 7200 1x 20" crt 1x 19" Lcd 1000Mb Lan

Enhancement request is being sent to sw corp, bring back my crashes!!!! :-s

Reply to
CS

Any feedback from other folks who have been having lots of crashes? I would love to think that moving to SP5.0 from SP3.0 would make at least some fraction of our problems disappear. (SW05 is probably not int the cards because we don't have time right now to fix the parts built in SW04 that break in SW05.) So far the new year gave one of my colleagues all of 10 minutes before his first CTD. I've got several hours in already without crashing, but for some reason I've been on a roll lately.

Jerry Steiger Tripod Data Systems "take the garbage out, dear"

Reply to
Jerry Steiger

Jerry,

SW2004 SP5.0 seems much more stable than what I was using which was SP4.0 or

4.1 (can't remember). I haven't had it crash but once since I installed it on 12/14/2004. I used to have several a day...
Reply to
Seth Renigar

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.