What would you do with it ??? The ultimate door stop !! hot air blower (see thread on condensation) ? Paper shredder ?
Mike.H.
What would you do with it ??? The ultimate door stop !! hot air blower (see thread on condensation) ? Paper shredder ?
Mike.H.
========================================
Sorry I seem to have "orphaned " a 2 full link below
------------------------------------------------------- It worked OK when I test posted to myself but not to the Ng. ???????????????? MH
Works ok if you copy and paste including the stray 2.
Can't see it as being much use to keep workshop warm and dry though - not without the afterburners anyway :-)
Try
-- Dave Croft Warrington England
-------------------------------------------------------------- I did copy and paste on both occasions ,as I stated the test post to myself was OK but the ng posting had a stray 2.Anyone any idea why ?. could make an upmarket leaf blower, Mike.H.
Hi Mike, If you are using OE go to Tools/Options/Send/News Sending Format/Plain Text Setting (Make sure you are sending plain Text) Increase the Setting. I have mine set at 120. HTH
-- Dave Croft Warrington England
------------------------------------------------------------- Thanks for that ,I was already in plain text but have increased the settings.Hopefully that will cure the problem. Mike.H.
No bids, I see!
Anyway, this is an Oly 320 - IIRC, the TSR2 along with Concorde was fitted with 593B's
Regards,
Kim Siddorn
---------------------------------------------------------------- The TSR2 had the 22R version of the Oly 320 and was scrapped before the 593 flew. I well remember throwing thousands of pounds worth of 22R bits in the scrap bin because they were ministry property and not to be used for any other project. One piece escaped though ,I have a three foot piece of two inch stainless tube supporting my satellite dish. Mike.H.
I like my leaf blower to mulch as well. I'm afraid that there might be some vane damage when used thusly. With the afterburners, disposal might be cheaper!!
Dan
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.