Hi
Could someone please advise me if it is possible to use Flux covered wire in a gas welder - with the gas turned off and a larger tip fitted.
Ian McDonald
Hi
Could someone please advise me if it is possible to use Flux covered wire in a gas welder - with the gas turned off and a larger tip fitted.
Ian McDonald
Yes But Use lots of anti splatter spray around the nozzle. Also you may need to slacken your roller tension,if the wire comes out flat ;o)
--Ikie
In many cases you have to reverse polarity in the Mig gun connection as well.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.