Welding Muntz Metal

I used to weld a lot of Muntz using Silicon Bronze filler rod. TIG welded it
using DCEP, using either pure or 2% thoriated tungsten, sharpened to a point.
The key to a good weld is to watch the weld puddle, and adding filler rod at the
correct time. If you wait a second too long, the puddle falls away. With a
little practice, you can make very nice welds that are imperceptible after
Reply to
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.