Latest threads in ⚡ Welding Forumsshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
old welding rod
A friend of mine is giving me a Lincoln "tombstone" arc welder that has been sitting in his garage for 15+ years (it needs the fan repaired). He also gave me several boxes of welding rod of the same...
3
|
16 years ago
|
3 | |
|
mig wire and tips - easy ?
I see MIG wire that says 0.032 inch diameter and contact tips that are also 0.032. Are the 0.032 tips made to slide 0.032 inch diameter wire through, or do I need to get larger tips?
9
|
16 years ago
|
9 | |
|
Hobart Hefty wire feed
I recently acquired a HOBART HEFTY wire feed suitcase. It seems to be meant for fluxcore only. It actually works. It is CC/CV wire feed. Does anyone know if spare parts for it are completely...
3
|
16 years ago
|
3 | |
|
Ready Welder?
Has anyone ever purchased or used a Ready Welder? these good units? Their website says lots of good things about them, but anyone can create a website. http://www.readywelder.com/
45
|
16 years ago
|
45 | |
|
Silver brazing
I was watching the HVAC gut install a new AC unit the other day and he was silver brazing the pipes without using any flux. Is this OK?
6
|
16 years ago
|
6 | |
|
Plasma Cutter
I have a recently purchased 40 amp plasma cutter and have some questions. Most of my day to day cutting is 1/8" - 1/4" mild steel and as this stuff will all be welded I'm trying to get the cleanest...
2
|
16 years ago
|
2 | |
|
F/S ARC welder
chicago electric ARC 140 $100
1
|
16 years ago
|
1 | |
|
ok, got good suggestions for good rod, now....
whats the hardest thing to weld with an AC arc welder? I'd like to try something challenging to help find any poor habits i might be picking up, and i figure that the bad habits will show themselves...
4
|
16 years ago
|
4 | |
|
WP-9 Gas Cooled TIG Torch
Hello Am going to work part time for a company that make small Stainless Steel parts , looked at the welding area and TIG Torch that they have been using is a little smaller than a ball bat , over the...
5
|
16 years ago
|
5 | |
|
Welding Supervisor
Hi, I'm currently doing a welding supervisors certificate(Structural) in Australia. I have studied like I have never studied before for this upcoming exam, I am hoping somebody out there has done this...
5
|
16 years ago
|
5 | |
|
Inverter welder rocks the house
I've got a tiny Lincoln Invertec V100-S welder as a backup unit for my house, and I am having problems with it. The documentation says it requires a 20 Amp 110V circuit, and it has a 100 Amp output...
13
|
16 years ago
|
13 | |
|
Ping Gunner
I sent an e-mail, but I'm not sure it made it through. I got the plans in for the power hammer finally. Do you have time to check out the pile of air cylinders? If not, that is fine, it looks like I...
—
|
16 years ago
|
— | |
|
Welding 1.6mm square tube.
I'm a carpenter and I used to get my gate frames made by a friend who has moved away, so I decided that I would make them myself. I've had an arc welder for a while and while I'm no expert I'm...
19
|
16 years ago
|
19 | |
|
Interesting failure mode...
--Had to do some silver soldering the other day so I got out my nifty little air-acetylene torch. Trouble started when I couldn't get it to ignite, despite nice shower of sparks from the sparker....
3
|
16 years ago
|
3 | |
|
bonding Ti with Al
Please help me. I am trying to find an idea to bond pure Titanium with pure Aluminum. Anybody knows how to remove the oxide that prevent the joint and what kind of interlayer that should be used?..
3
|
16 years ago
|
3 |