FS-Bechler Screw machines

Im selling 4 Bechler screw machines and a Tornos parts machine
(3) late model A-10s, with tooling and accessories (1) AR-10
(1) Tornos screw machine for parts. Only missing a couple tool holders and uses 5C collets
All have bar feeders (12ft) with extra tubes
There is a cabinet with assorted collets, etc etc as well as spare parts
I am the owner of these machines and am offering them at a reasonable price. Id prefer to sell all 5 at one time, but will consider smaller lots.
These came from a shop that lost their machinist, and had only used these machines for plastic and brass parts. Very clean, very tight with so little wear on anything that if cleaned up..would be nearly new.
The machines MAY be purchased and then contracted to manufacture the parts that they are loaded up for. The company they came from is still in business and is currently having their parts made on the East Coast.
Contact me for information They are located in Fullerton California and there are loading facilities available until 12 midnight M-F.
Gunner
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
Im selling 4 Bechler screw machines and a Tornos parts machine
(3) late model A-10s, with tooling and accessories (1) AR-10
(1) Tornos screw machine for parts. Only missing a couple tool holders and uses 5C collets
All have bar feeders (12ft) with extra tubes
There is a cabinet with assorted collets, etc etc as well as spare parts
I am the owner of these machines and am offering them at a reasonable price. Id prefer to sell all 5 at one time, but will consider smaller lots.
These came from a shop that lost their machinist, and had only used these machines for plastic and brass parts. Very clean, very tight with so little wear on anything that if cleaned up..would be nearly new.
The machines MAY be purchased and then contracted to manufacture the parts that they are loaded up for. The company they came from is still in business and is currently having their parts made on the East Coast.
Contact me for information They are located in Fullerton California and there are loading facilities available until 12 midnight M-F.
Photos of these machines.....
http://picasaweb.google.com/gunnerasch/Pics2 #
Gunner
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
On Tue, 19 May 2009 23:06:15 -0700, Gunner Asch

http://picasaweb.google.com/gunnerasch/Pics2 #
Photos in the above link.
Gunner
"Lenin called them "useful idiots," those people living in liberal democracies who by giving moral and material support to a totalitarian ideology in effect were braiding the rope that would hang them. Why people who enjoyed freedom and prosperity worked passionately to destroy both is a fascinating question, one still with us today. Now the useful idiots can be found in the chorus of appeasement, reflexive anti-Americanism, and sentimental idealism trying to inhibit the necessary responses to another freedom-hating ideology, radical Islam"
Bruce C. Thornton, a professor of Classics at American University of Cal State Fresno
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Polytechforum.com is a website by engineers for engineers. It is not affiliated with any of manufacturers or vendors discussed here. All logos and trade names are the property of their respective owners.