Anyone wants a very worn Leblond 16x48?

Has taper attachment

formatting link

Reply to
Ignoramus12032
Loading thread data ...

How low is that front way?

Gunner

The methodology of the left has always been:

  1. Lie
  2. Repeat the lie as many times as possible
  3. Have as many people repeat the lie as often as possible
  4. Eventually, the uninformed believe the lie
  5. The lie will then be made into some form oflaw
  6. Then everyone must conform to the lie
Reply to
Gunner

I do not remember, but I can describe it as significantly worn.

Maybe 0.5mm

i
Reply to
Ignoramus12032

What is that in thousands? I dont have my slipstick handy.

Gunner

The methodology of the left has always been:

  1. Lie
  2. Repeat the lie as many times as possible
  3. Have as many people repeat the lie as often as possible
  4. Eventually, the uninformed believe the lie
  5. The lie will then be made into some form oflaw
  6. Then everyone must conform to the lie
Reply to
Gunner

Den 16-12-2012 09:20, Gunner skrev:

0.5 mm ~ 20 thou
Reply to
Uffe Bærentsen

Den 16-12-2012 09:20, Gunner skrev:

A very good conversion program for the computer is this:

formatting link

Have used it for long time :-)

Reply to
Uffe Bærentsen

Ayup..thats some wear. Ill pass. That particular Leblond probably doesnt have replaceable way inserts.

Gunner

The methodology of the left has always been:

  1. Lie
  2. Repeat the lie as many times as possible
  3. Have as many people repeat the lie as often as possible
  4. Eventually, the uninformed believe the lie
  5. The lie will then be made into some form oflaw
  6. Then everyone must conform to the lie
Reply to
Gunner

Saved and bookmarked! Thanks!

Gunner

The methodology of the left has always been:

  1. Lie
  2. Repeat the lie as many times as possible
  3. Have as many people repeat the lie as often as possible
  4. Eventually, the uninformed believe the lie
  5. The lie will then be made into some form oflaw
  6. Then everyone must conform to the lie
Reply to
Gunner

Like 0.02

Reply to
Ignoramus25632

Gunner, here is a quick and dirty way to convert. .25ACP is 6.35mm,

40S&W is 10mm(1cm, and .45ACP is 12.5mm.

Remember I said QUICK and DIRTY (grin)

Reply to
Bob Millerremove.us

.45 is 11.35mm, 1/2" is 12.5 and a fraction(13mm socket/box end usually works on 1/2")

Stan

Reply to
Stanley Schaefer

Indeed!!

Gunner

The methodology of the left has always been:

  1. Lie
  2. Repeat the lie as many times as possible
  3. Have as many people repeat the lie as often as possible
  4. Eventually, the uninformed believe the lie
  5. The lie will then be made into some form oflaw
  6. Then everyone must conform to the lie
Reply to
Gunner

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.