Cleaning for Oxygen Service

Jun 25, 2004 6 Replies

Does anyone know where I can get a copy of these publications other than joining the CGA?


O2-DIR "2000 Directory of Cleaning Agents for Oxygen Service"



G-4.1 "Cleaning Equipment for Oxygen Service"


Thanks.


Try -

formatting link
or

I'm guessing you can buy them from CGA with out joining.

Vince

Mark wrote:

Hi Mark,

Now you done it! You went and picked a subject near and dear to my heart. The blatant rip off and extortion of American industry by the jack booted thugs of NAPA and their henchmen enforcers, your local fire dept. All in the guise of safety!

Do I sound bitter? I AM! I have a long story I could tell you. I am currently trying to put a web site up that tells it. I'm more than sure I don't have to say to much more than that, and that most of the members of this group have stories of their own dealing with these thugs. Being that this is just my 2nd day of following and posting to this group I don't know any of your stories. You tell me, am I right?

I have a copy of NFPA 51, Standard for the design and installation of Oxygen-fuel gas systems., 2002 edition. (most current) It's a 17 page pamphlet of information that's been around since the 30's.

It makes these references as to proper cleaning of copper for piping of O2.

"A.6.4 Also see CGA Pamphlet G-4.1, Equipment cleaned for Oxygen service."

"A.6.4.1 Hot water solutions of caustic soda or trisodium phosphate are effective cleaning agents for this purpose."

Hope that helps.

Randy H. SC Glass Tech. Scam Diego, Comi-fornia

I know when I was in thre USAF and worked O2 systems the only approved method of cleaning anything that came into contact with O2 was to use trico 1.1.1 followed by a rinse of distilled water, followed by a check with a ultraviolet light..........after they started to phase out Trico's use at field level we used a compound simply called PF, which was used to wash the items two times and followed up with a triple rinse of distilled hot water between each PF wash and finally a ultraviiolet light check.....and a hot O2 gasseous or nitrogen purge

Now everything goes to depot level if it needs cleaning.... Visit my website:

formatting link
expressed are those of my wifes, I had no input whatsoever. Remove "nospam" from email addy.

Huh? The National Auto Parts Association are "jack booted thugs"?

Gary

opps! I surely meant NFPA. The National Fire Protection Agency.

I think I think I was set up by my spell checker!

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required