i typically scan manuals; some of these are extremely lengthy, others i might sell outright, please contact me for info.1) Machining Center Programming & Operation by Vector - Artran (1996); shows the Vector Contour control on the cover, but does NOT include any physical info on the control itself - it does have some phone numbers on the front cover for service.
2) Operation & Maintenance of the No. 00 Ultramatic Screw Machines, Brown & Sharpe.3) 2.625" (67mm) Six Spindle Bar Automatic Machine & Attachments, Operator's Handbook, Wickman Machine Tools
4) Yaskawa Varispeed-606PC3 Inverter Instruction Manual - two volume set for the ultra-compact all digital low noise inverter (VS-606PC). Models: CIMR-PCA2, CIMR-PCE2 (230V 3-phase), CIMR-PCAB, CIMR-PCEB (240V single phase series), & CIMR-PCA4, CIMR-PCE4 (460V 3-phase series).5) ARC Machines Model 207 Welding System: i have two original manuals for the Model 207A (p/n 760037) Welding System Electrical Drawings - will sell one outright.
6) IKEGAI Instruction Book: massive volume (about 2=BD " thick), appears to be for the Model TC25 w/ FANUC18T (and 16 series also) - programming, parts, ladder diagram, etc.
please email replies i don't get back here very often. tnx, barry carson city, nv