help with colchester master mk 2

just bought a colchester master mk 2 and am in need of a manual does anyone
know where i can purchase one
Reply to
chuckiegg via CraftKB.com
Loading thread data ...
Hi
I ordered one (a photocopy) from
formatting link
good service.
Stuart
Reply to
Stuart Pearson
Good going!!! I love that machine
formatting link
What do you need to know?
Gunner
Reply to
Gunner
thanks for the help,i have already visited the site and emailed the guy but have had no response have you information so i can oder this manual nicole
Reply to
chuckiegg via CraftKB.com
hi thanks for your help as i said to the other guy i had been on this site and emailed the guy but have had no response.i am a toolmaker and was trained on this machine but it was 15 years ago and i need to jog my memory thats why i wanted the manual thanks again nicole
Reply to
chuckiegg via CraftKB.com
Have you considered contacting the 600 group which Colchester is part of IIRC, they may still do manuals. BTW are you based in the Bristol area uwe = university of the west of england.
Reply to
David Billington
If you are in UWE, or anywhere with a reasonable timezone, then give Tony a ring at the phone number on his website. He's pretty good in my, limited, experience.
Mark Rand RTFM
Reply to
Mark Rand
unfortunately not i live in brittany france this is why its not so easy but i will try to contact them thank you
Reply to
chuckiegg via CraftKB.com
I never dealt with him by email only by phone aswell
Stuart
Reply to
Stuart Pearson

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.