PC Kabel für Multiplex Cockpit MM

Peter Gruen schrieb:

Hier ist alles dokumentiert:

hat für alle Sender das gleiche Kabel Gruss Jürgen

"Peter Gruen" schreef in bericht news:c17pok$ru8$ snipped-for-privacy@online.de...

Hi,

A) For Win 95-98-Millennium with FMS, 2 easy possibilities (above all possibilities that are also possible for Win 2000 and XP, see section "B").

1) THROUGH THE PARALLEL-port (LPT1) eventually with a resistor and zenerdiode, see the manual of FMS or some examples on my website which I personally tested figure 7f-fms and others in chapter 7. Or here : (German).

2) THROUGH THE SERIAL-port See the manual of FMS

If you think you're not able to make such a cable, buy eventually one : (German)

B) For Win 2000 and Win XP with FMS, a SIMPLE connection through the parallel-port or serial port is not working, those 2 versions of Windows are handling other protocols on these ports than Win 95-98-Millenium.

Your options then :

1) THROUGH THE SOUNDCARD With smartpropo : advantage is that it's simple to make : 1 audio-cable and a resistor or potmeter

2) THROUGH THE SERIAL PORT (Com-port) a) via an interface with a programmable IC (PIC), which is described in the directory of FMS, see .FMS\Doc\Interface\readme_en.htm on your harddisk. Or

or the same electronic interface that you can buy ready to use here : (German) (French)

3) THROUGH THE USB-port (selfmade) (French) (French) : kit) (German) (German) If you have a 4-axis joystick, you can use an interface-cable gameport-->USB, for sale in every computershop, thus ideal for modern laptops without a COM-port

4) THROUGH THE GAME-port a) with an interface which transforms the signal of the transmitter in a joystick-signal

(French) (selfmade) (German) (German)

b) buy a 4-axis-controller joystick

(German)

c) or make yourself a 4-axis joystick with an old RC-transmitter, removing all electronics, replacing the 4 potmeters by potmeters of 200K (not 100K like mostly mentioned), and wiring like in :

(French) (French)

5) Or make a partition on your harddisk where you will install Windows 95-98-Millennium. Then you can connect your radio simply via the parallel-port or Serial-port as described in the manual of FMS and start the older Windows (see section "A").

6) NEUE : auch fur XP und Win 2000 : PPJoy via parallel oder seriel port

download von programme PPJoy : Hope this helps, Olivier

Hi Juergen, hi Peter!

Jürgen Neuenhahn schrieb:

Das ist das Kabel zur Programmierung der Anlage, nicht fuer FMS! Bei FMS ist das benoetigte Kabel abhaengig von der verwendeten Windows-Version. Wenn Peter mal schreibt, welches System er hat, dann kann man genaue Tips geben. Ansonsten sind bei FMS sogar die noetigen Infos bei (PIC-Programm und Schaltung fuer Win2000 und groesser, Programm fuer AVR2313 gibt's ggf. bei mir).

Gruss Chris

Hallo nochmal

danke für die schnelle Antwort. Ich verwende hier W> Hi Juergen, hi Peter!

Hi Peter,

Peter Gruen schrieb:

eine bessere als Oliviers Antwort habe ich aber nicht mehr parat! Interessant fuer Dich duerfte Punkt 1 oder 2 sein.

Chris

Vielen Dank nochmal an alle. Durch Olivier Tip habe ich eine einfache Lösung gefunden die mittels

7 poligem Diodebstecker, einem Widerstand, einer Zehnerdiode und einem Sub D Stecker leicht herzustellen ist.

Peter