design table issue...

We have a part file with hundreds of design table driven configurations. Today, we went to edit it and discovered the embedded excel design table was blown out and they are all manual. We have a working back up from a while back and I was thinking about replacing the current one with the known old one (unless someone can tell me an alternate way of re-associating an embedded design table that no longer appears. Does SWx have a summary telling me how many configurations are in a part? I'd be nice, for example, to see that I have 560 configs in the "corrupted" Design table missing file, and 560 in the back up and not have to count configurations.

Any ideas?

Reply to
IYM
Loading thread data ...

Save the old design table externally, then insert that table into the newer (missing table) part.

That table should take control of all configurations and show any new configs not driven by the old table.

Keith

Reply to
Keith Streich

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.