Oh dear I got home early home from work today and after posting that last message I decided to have another go Have a look and see what happened
formatting link
Steve
Villiers magneto
Apr 15, 2005
25 Replies
Whoops.........................
Brian L Dominic
Web Sites: Canals:
formatting link
of the Cromford Canal:
formatting link
Light Railway:
formatting link
Please note that the reply-to address is NOT read: To email me, please send to brian(dot)dominic(at)tiscali(dot)co(dot)uk
You might well find one at the Enstone engine jumble this coming Saturday. Enstone Airfield Leave M5 at J 11A.
A417. SO A436.
Junction of A417/A429, TL Bourton on the Water.
A429 to Stow on the Wold. TR A436
Junction A436/A44, TR A44 - Chipping Norton.
by-pass Chipping Norton continuing on the A44.
2.9 miles after the traffic lights to the east of Chipping Norton, you enter the 30mph limit signifying the start of Enstone village.300m after the 30 limit signs turn left, signposted Church Enstone and Bicester.
Continue round the back of Enstone village, through Church Enstone, across the B4022/B4030 junction.
The entrance to the airfield is 0.75 mile on your left from this point.
Regards,
Kim Siddorn
In spring, a man's fancy lightly turns to thoughts of getting his motorcycle on the road!
Go to
formatting link
It will tell you a lot about your engine. I have just acquired a circa 1930 Atco Standard 16" mower and I have no spark. I'm going to have to find a replacement coil, I think.
x-- 100 Proof News -
formatting link
3,500+ Binary NewsGroups, and over 100,000 other groups x-- Access to over 1.6 Terabytes per Day - $8.95/Month x-- UNLIMITED DOWNLOAD
sorry I misquoted a web-site. For information regarding Villiers 2 strokes go to
formatting link
I am about to restore an ATCO Standard Mower (circa late 1920.s). The flywheel was removed without any problem at all.
Stan Jones
x-- 100 Proof News -
formatting link
3,500+ Binary NewsGroups, and over 100,000 other groups x-- Access to over 1.6 Terabytes per Day - $8.95/Month x-- UNLIMITED DOWNLOAD
Thank you for that link Stan
I have recently acquired another flywheel magneto and fitted it to my engine and like you I have no spark .
Reading the web page I think I may have misjoined the timing marks ( another small job for the weekend I think )
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required