Clancy's Lazy-E-Bee..

Anyone flying one of these RTF models? Opinions? TIA

Ed Cregger

Reply to
Ed Cregger
Loading thread data ...

Ed- If you're looking at one sold by Hobby People, forget it. I got one for my granddaughter to learn on - a real mistake. Barely gets off the ground with the supplied cobalt 400 motor, and then only if directly into the breeze. Any slight measure of crosswind and it will weathercock and spin around. Requires full power just to barely struggle around, and generally handles like a lead sled - not the relaxing putt-around model it appears to be, and certainly no trainer.

Abel

Reply to
Abel Pranger

Thanks, Abel. You saved me lots of frustration.

Ed Cregger

Reply to
Ed Cregger

"Ed Cregger" wrote in news:Eaw9e.4340$f6.2623 @fe04.lga:

Two different planes. The Lazy-***E***Bee is a great little foam copy of the orignal Lazy Bee and flies great. Tons of fun, but perhaps not the best trainer (not bad, though). Adequate power as sold. It really has that Clancy feel. Can make a great back yard flyer for an intermediate pilot, but should only be flown without wind in a football/soccer/baseball sized field for training.

The Lazy Bee ARF with the Cobalt 400 is a different bird. The ARF is good, but not as great as the kit due to some minor changes in the nose configuration and lack of shock absorbing axle box. However, I think the ply bulkheads in the ARF are a good improvement over the orignal kit. It flies great if the optional Wattage planetary gearbox is added to that motor and a larger prop is used (about an 11x8 should be good on 8-9 cells). The direct drive C-400 is a bad power plant for this plane; you are right about it being a mistake as sold. Shame on Hobby People!!! With a gearbox it is a great, but not perfect motor. It will rock and roll with great snaps and tumbles with the geared C-400, but of course, more power is better!!!! The overall plane construction and covering is quite good. Yaw stability seem to be a bit less with the ARF, but not a problem.

-- Alan

Reply to
Alan

"Alan" wrote

Thanks, Alan.

Ed Cregger

Reply to
Ed Cregger

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.