1. Home
  2. AutoCAD discussions
  3. platonic solids?

platonic solids?

I've got a little project on to create a picture that will contain the 5
platonic solids and the sphere. Does anyone have .dwg drawings of these
objects already done that they wouldn't mind sharing with an Autocad novice?
Thanks.
Reply to
Mark Hendy
Loading thread data ...

Further Reading

  • Create extruded 3D solids in FME

  • Hi,I'm trying to create extruded 3D AutoCAD solids from a table of...

  • A little project that needs a clamp

  • I've got the itch to put together a mortiser (woodwork machine),and have...

  • I've got a pic posted on abms...

  • You got me there...I've been playing so much that I think I've opened a...

  • Another little shop project

  • I got a call this morning from a guy with a broken tractor part . This is a...

  • Who's working on the DARPA Little Dog project

  • Who's working on the DARPA Little Dog project? I know thatStanford and...

  • Neat little welding project

  • --Interesting build this guy's got going; some good videos onhackaday:...

  • Getting fillets to work on 3D solids

  • I am dabbling with a small machine part. I've done a lot of...

  • A little metal project

  • That's my next project. It needs to be a 700 mA current sourcewith load...

  • little joe 10 project

  • some pics before I glass the fins are on abmrmore at...

  • A useful little project

  • I discovered that I needed a small plastic-faced hammer. I know theyhave such...

  • Cool little staple gun project

  • I need an air staple gun to shoot an 18ga., 1/4" crown, by 1/2" length. But, the...

  • How to create a staggered pattern feature in SW?

  • Greetings:Is there a way to create two rows of a staggered hole cut as shown...

  • Subtracting solids

  • Solidworks 2007 SP5Is it possible to subtract one solid from another in the same...

  • I've got more questions than answers

  • I'm trying to understand the application of VFDs in industry. I understand...

  • CO2/Argon big tank to little tank transfer

  • Hi all,I have a 251 ft^3 Argon/CO2 mix tank, and little (60ft^3 ?) tank of the...

  • Locating blocks

  • How does one go about locating blocks in a drawing? I have some blocks I want to...
  • « previous thread

  • Graphic File Generation

  • I am in charge of the site drawings in a shipyard. Due to the yard being in...
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.