What is it? LXXIX

457. Hay knife -- for cutting hay loose when it used to be piled rather than baled. Now, livestock farmers use them when wanting to slice hay off a contolled portions from a large round bale. It's way easier to cut than trying to take a pitchfork and pull it loose.

459. A bluegrass or other small grass seed harvester. One would walk through the knee deep grass, swinging it back and forth. In between the large "teeth", there are small slots cut in the metal where the stem of the grass is forced during the swinging action. As the bucket continues to swing, the grass seed is stripped off the stem and captured in the bowl.

Reply to
DAC
Loading thread data ...

"Mike Dworetsky" writes in article dated Thu, 15 Sep 2005

19:22:08 +0000 (UTC):

Back then they were probably called "crap scrappers".

454 -- designed to strap on to an old-style phone. Others have said amplifier for the earpiece, could also be a pickup or speaker designed to connect to a tape recorder. 456 -- some kind of puller

451 -- antenna rotator control

-- spud_demon -at- thundermaker.net The above may not (yet) represent the opinions of my employer.

Reply to
Spud Demon

Your answer is right, but 452 is part of last week's set, see the answer link after the last photo for rest of the solutions.

Rob

Reply to
R.H.

According to Billy Hiebert :

To test them under load, at that. That's what the wavy cross-piece is for -- the load resistance.

But ... that was from last week's set of questions, to which he had already posted answers. Go to the bottom of the page and click for the answers and you will see. I think that he needs a much more obvious divider between the current ones and last week's batch.

Enjoy, DoN.

Reply to
DoN. Nichols

I'll put that note back up on my site, I removed it a few weeks ago when I made some changes.

Rob

Reply to
R.H.

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.