1. Home
  2. RC and scale modeling (French)
  3. Où acheter du Bare-Metal Foil ??

Où acheter du Bare-Metal Foil ??

Bonjour,
j ai besoin d'acheter du bare metal foil aluminium, où puis en trouver ?
Ce n est pas pour une maquette, c'est pour réparer un chant de plan de
travail en alu qui est abimé, cette solution me parait pas mal. A moins que
vous me proposiez une autre solution ??
Merci pour votre aide
Cordialement
Reply to
loop
Loading thread data ...
loop a exposé le 19/01/2005 :
Le bare metal est très fragile. Il vaut mieux que tu utilises du bandage pour pot d'échappement (celui en alu bien sûr), ou du clinquant autocollant pour plomberie.
Reply to
Flying Frog

Site Timeline

Related

  • [ou acheter du Depron]

  • Bonjour,je cherche ou acheter du Depron, avant il y en avait à Leroy Merlin...

  • Bare Metal Foil advice

  • This is my first experience with Bare Metal Foil and I am wondering how...

  • Future over Bare Metal Foil

  • I want to use bare metal foil on some trim areas of a model I'mworking on. ...

  • Re: bare metal foil question

  • The below is a good guide line. I don't knowwhere you live but here in the...

  • Bare Metal Foil Mixed w/Alclad

  • Starting on a kit and want to use Bare Metal Foil.. However, some of thepanels...

  • Re: Cutting Circles in Bare Metal Foil

  • I have never had to cut a circle in foil yet, but I do use aOlfa knife for all...

  • Metal foil

  • Anyone know of a company that can make metal foil in long rolls at around 2to 5...

  • Où trouver du CARBONE ?

  • Salut à tous !Je cherche une petite plaque (17x11cm) de carbone en 2 ou 3mm (c...

  • où acheter des plaques de carbone

  • BonsoirQu' est ce que c' est cher ces plaques!je voulait en acheter mais...

  • Bare metal treatments

  • I want to do some projects involving leaving metal bare. But, I do want to heat...

  • Bare metal finish seal ?

  • Being a newbie to the bare metal finishing of plastic models, I broughta Testors...

  • Looking for Bare Metal Primer

  • I found this item in the MSC catalog: High solids, low voc epoxy primer....

  • Où trouver...

  • Bonjour,Où acheter (sur le net) un relais temporisé à l'appel et à la...

  • aluminum foil

  • Would there be any advantage using aluminum foil in the oven on pans byplacing...

  • Foil Plotters

  • Can anyone give supplier details for large format cad plotters used forplotting...

  • Protecting bare metal from rust

  • Galvanic is the word for it. Stainless protecting itself at the expense of some...

  • Titanium Foil?

  • I saw a bid list that included some Titanium foil. What would this begood for...

  • Stainless foil

  • I assume many of you are aware of the stainless foil that is used in...

  • Bare metal finish WWII US Navy aircraft

  • Now that I've got your attention...I want to build an F4F Wildcat coming off...

  • canopies and foil

  • so how do you use foil to mask a canopy?

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.