Exporting to ACAD

Is it possible to export drawings from SW2004 to .dwg with layers for the
different linetypes. It'd be nice if I didn't have to go back into ACAD to
change the color for the hidden lines, centerlines, etc...
TIA
Fred
Reply to
iii
Loading thread data ...
Seach the help for "DXF MAP". Here's the contents of mine to get started:
[Version] SW990001
[Layers] 0 = 7, 0 DEFPOINTS = 7, 0 HIDDEN = 1, 2 CENTER = 2, 7 DIMS = 4, 6 WORKPIECE = 1, 14
[Entities] Dimensions [1] = BYLAYER, BYLAYER, DIMS Notes [2] = BYLAYER, BYLAYER, DIMS Geometric Tolerances [3] = BYLAYER, BYLAYER, DIMS Center Marks [4] = BYLAYER, BYLAYER, CENTER Section Lines [5] = 5, 5, DIMS Detail Circles [6] = 4, 4, DIMS Symbols [7] = BYLAYER, BYLAYER, DIMS Datum Tags [8] = BYLAYER, BYLAYER, DIMS Datum Targets [9] = BYLAYER, BYLAYER, DIMS Weld Symbols [10] = BYLAYER, BYLAYER, DIMS Cosmetic Threads [11] = BYLAYER, BYLAYER, HIDDEN Bill of Materials [12] = BYLAYER, BYLAYER, DIMS Blocks [13] = BYLAYER, BYLAYER, DIMS Center Lines [14] = BYLAYER, BYLAYER, CENTER Hidden Lines [15] = BYLAYER, BYLAYER, HIDDEN Crosshatching [17] = BYLAYER, 8, DIMS Detail Border [18] = BYLAYER, 10, DIMS User - Dashed [20] = BYLAYER, BYLAYER, HIDDEN User - Center [22] = BYLAYER, BYLAYER, CENTER
[Colors]
Reply to
Dale Dunn
Thanks Dale I'll give it a shot.
Reply to
Fred

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.