Unilateral Dimensioning in Autocad 2000

Can any please tell how to mark unilateral dimensioning in Autocad
For ex:
Basic Dimension : 20.00
Lower Limit : + 0.20
Upper Limit : + 0.40
Please help in this regard
Reply to
Loading thread data ...
This works in AutoCAD 2002. Turn on deviation tolerance
set upper value = 0.040 set lower value = -0.020 (minus sign in front)
That gives values of +0.040 and +0.020 after the dimension.
Reply to
Tim S

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.