[RC] Silniczki od CD

Loading thread data ...

Hi y'all,

Careful, although both cd-rom and lrk motor types are outrunners, they have different winding diagrams!!!

Lot's of cd-rom links/magnet sources/tricks compiled here:

formatting link
this link:
formatting link

And these two: One hour cd-rom conversion and pylon cd-rom motor:

formatting link
Part II:
formatting link

The do-it-yourself brushless e-motor discussiongroup:

formatting link

Or it's French counterpart ;-)

formatting link

Our 13th. int. electric fly-in & diy brushless e-motor meeting, 80 pilots in 2003, pictures and info on 2004:

formatting link
vriendelijke groet ;-) Ron van Sommeren near Nijmegen, the Netherlands

Reply to
Ron van Sommeren

no dobra a ktos z was to zrobił? jakie wrażenia?

pozdrawiam

ArturL

Reply to
arsenel

Witam. Ja już przerabiałem silniczki cd-r -i wykonałem już ponad 20 w pełni udanych sztuk -o bardzo dobrych osiagach -silnik o wielkosci srednica 28mm -długość 8mm i wadze jedynie 26g ma moce zblizone do speed 400 -przy podobnych smiglach jak do speeda -nawet sporo wyższe (około 30%) -lub nieco nizsze -ale ciagnie bezpośrednio duze smigła 8x4,3 lub 9x6, sprawność silników sporo lepsza niż poczciwego speed 400 -ale aby silnik miał super parametry -przerobić trzeba go też super... -przeciętna przeróbka daje przeciętny silniczek... ja zanim zrobiłem pierwszy udany -to zrobiłem ponad 50 prób róznych wersji które były w wiekszości kiepskie -często wręcz beznadziejne... pozdrawiam Witek

Reply to
wit0

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.