Keys for KIA

Not sure, but I would check other Korean and Japanese listings to see if the depth and spacing are the same. If not, didn't they give you a way to add new keys? I can do that with my Code Pro.

Steve...

This might help you in the future.

Dale's Lock and Key

Utah USA

code is correct. insrt - 2 / tip - 0 Blank - X253, KK3 SPACING

g'day

---snip---

sorry for the double post.. RR has been acting funny the last few weeks.

g'day

Other Depth's below look wrong but the spacing is correct but try these Depths If the other did not work DSD#237 Series Y2001-3000, KIA

Original 0K2A1 Ilco X253 Ilco EZ KK3

KIA - KK1,KK2 - ITL-520-2 KIA - KK3,KK4 - ITL-251-2

The last number is the insert.

Dennis

If not, didn't they give you a way to add

Thanks Roger, yes, that's what I meant, I had to make up my own number and set the machine up to KIA specs. Been quite a few years since I have had to do this, lucky I kept the instruction book, probably would have been quicker to impression the thing. Funny, the car was only a couple of years old and in reasonable condition. The owners (Aboriginal / Islander natives) lost their last key, the car was locked up at the rear of the local Pub, so they tried to open it with a crow bar jammed in the door frame. Did at least 2 grand worth of damage before they called me. These things open in about 2 seconds using a 'slim' hair dryer. Thanks everyone for your input on the subject. Cheers.

sorry, depths were NOT wrong according to Genericode.

Thanks Dennis, tried both these ITL numbers, my machine rejected both #'s. ITL 520 = "too many cuts" & ITL251=No info. Go figger ? ........ Not to worry, I made my own ITL#. Thanks.