1. Home
  2. Solidworks CAD Design software
  3. Interesting Drawing problem

Interesting Drawing problem

I cannot seem to creat a drawing vew properly here???

formatting link
There is one profile extrusion that will not for the life of me change to just the lines it has to be the shaded withoug lines display state for only one part? Funny thing is the part is an exact duplicate of the one on the other side of the tube so why is that one not friggin blody green too?

My options-Color is set to use the default line color in edges with shaing mode (black) in options for all assemblies and parts

There is only one display state in the main assembly, sub assembly and part... and they all show shaded with lines...

So why is the fridding part and only one of two showing shaded without edges.....

GGGAAAAHHHHHHHHHH!!!!!!!

For as much as I love this program these little gremlins come at the worst time..

Disgrutled... Bah Humbug! Ben

Reply to
Ben Eadie
Loading thread data ...

Further to this is I flipped the display state of one part to edged only in the assembly, went to the drawing and nouthing flipped it back to shaded with edges and the drwaign view now shows the other part like the first, shaded? And to top it all off it wont change back. What the hell?

Ben

Ben Eadie wrote:

Reply to
Ben Eadie

Ok found this whizzy clear top level overide option in display states in the top level assembly...now this worked partly....

seems to have corrected my last posts problem but then turned the fisrt part problem to a sub assembly problem

formatting link
Closer but no cigar....

HeLp!!!! I am slowly going crazy..Crazy slowly going....

Ben Eadie wrote:

Reply to
Ben Eadie

Just a guess, but did you clear overrides in the subassembly too?

Reply to
Dale Dunn

Thanks for making me check though

Ben

Reply to
Ben Eadie

One more furthur to that

Ok so if I set the view of the sub assembly to

formatting link
The main assembly shows this
formatting link
And the drawing works????
formatting link

So this is the work around but really what the #$%&!!!!

Ben

Ben Eadie wrote:

Reply to
Ben Eadie

Ben

We had sort of the same problem with castings and tangent edges hidden, everything dissapeared. The work around we found (SW2005 SP3) for the drawing was to reduce the Wireframe and High Quality HLR/HLV resolution in the Document Properties/Image Quality screen. Hope this helps

Brian

Reply to
McBrian

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.