3D Instant Website - NOT

I have the exact same problem on my work system. I have also attempted to get the problem resolved by contacting my VAR but the problem has not been solved. My work system is a Dell M60 Laptop running XP Pro SP1.0 and SW2005 SP0.1. I had the same problem with SW2004 in all SPs. I do not get this error on my home system which is much less equipped running XP Home SP2.0. I did a clean install of SW2005 in the hopes that it would correct the problem but it didn't. The computer has 1 Gb of RAM and the video card is one of the approved cards with 128 Mb of RAM. I was also having a problem with HTML help that I recently resolved and I thought that might have fixed the problem but I fired up the laptop this evening and tried it but I still get the same error. Maybe someone from the group has been successful at fixing this problem.

Regards

Mark Downey

Are you sure this isn't a firewall problem?

Matt

"Mark Downey" wrote in news:BF9vd.21692$Ae.9186@fed1read05:

Thanks Matt, The short answer is, I don't know! I don't have any other firewall than XP Pro has as a default. Did you do anything differently as far as XP is concerned?

Muggs

Are you using XP sp2? There are some new things with sp2 that I'm not completely on top of, but they tend to interfere with network communications. I guess if you internet connection doesn't work, at least it's secure.

Try going to the Control Panel, and then Firewall, and turn it off. Then test the 3DIW to see if it works. If it works with it off, you may have to fiddle with the firewall exceptions to allow 3DIW to go through.

matt

"Muggs" wrote in news:3IOdnc9UfOyCKyDcRVn- snipped-for-privacy@comcast.com:

Yes, I have XP SP2, but it was a problem in SP 1 as well.

OK I turned off the firewall and still no joy. I think I'm going to reinstall SW 2004 and just check that.

Thanks Matt, I'll let you know what I find. Please let me know if you think of anything else.

Muggs

Hi there,

Can you publish locally, ro does it not work at all?

Good question! Sorry I should have mentioned it. No not at all, and yes I went through and set up the administrator.

Thanks, Muggs

"Lee Bazalgette" wrote in message news:41be075e$1 snipped-for-privacy@mk-nntp-1.news.uk.worldonline.com...

Another two things:

One is to see if save as MTX is in you save as list - not sure if this makes any odds, but it's worth trying I suppose. If it's not there then see if it's in the add-ins list and check it.

The other is to try the various output options using the web publishing 'wizard', such as Hoops, JPG, Viewpoint and Edrawing. I always use Viewpoint (since I want peopole using Macs to be able to view the stuff as well), but I found with SW2005 they had changed the way the publisher works; you had to select the type of output and add it to the list of files before it would publish the correct type of file. Plus it alwya defaults to Edrawing, which I find annoying.

Good luck!

Lee

No! Not sure what that means.

Yeah I though of that as well, but no joy. The really infuriating thing is the wonderfully informational report that "An unknown error has occurred". NO S**T!!!

Thanks anyway Lee, Muggs

A possible clue: My firewall/antivirus software warns me that ViewMgr.exe is trying to access the internet on a regular basis and that it is suspected of being spyware. This is actually the Viewpoint software (used by 3D IW), which Viewpoint claims is NOT spyware, but my ZoneAlarm A/V recommends banishing it since it is on the suspect list. (And apparently it is also used in ad-ware.) Perhaps a more automated security system might lock it out without asking?? No Viewpoint ==> No 3D IW??

Brenda

Awwwh!

Thanks Brenda, I really thought that you had something there, but turned off all AV and such, and still no joy.

Muggs