1. Home
  2. Solidworks CAD Design software
  3. Design table or equation, 4in pitch on diameter that changes

Design table or equation, 4in pitch on diameter that changes

I have a large ring that changes in size there will be holes along the circumference the pitch is 4.000 center to center around the complete diameter what might be the best way so this updates, number of instances?

design table or an equation. I

The file can be downloaded here 2006 href="

formatting link
">110-15-002.SLDPRT snipped-for-privacy@gmail.com it can be sent back here if that is possible

thanks in advance r

Reply to
blackskyano
Loading thread data ...

You need to determine if your requirement is to drive the diameter as a function of the 4" center, or if the 4" dim is allowed to float in a range. This will affect the structure of the part. Also, is the 4" a chordal dim, or an arc length?

WT

href="

formatting link
">110-15-002.SLDPRT> snipped-for-privacy@gmail.com it can be sent back here if that is possible

Reply to
Wayne Tiffany

I still havent got this figured out. this is going to be a clearnance hole and the 4.00 dimension can be rounded up or down from the 4.0 inches so the spacing will be equal

what is the best way to do this?

Thanks in advance R

Reply to
blackskyano

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.