30 discussions on PolyTech Forum about the Hitec HS-55: what owners asked, what went wrong, and what fixed it.
Wondering if anyone has any explanation for my problem.....Ive recently purchased an EXTRA 330s Electric (much like the mini katana)made by Phoenix Models. I set it up with electric gear:Novatech 25amp ESC4 x Hitec HS55Hitec Mini RXE-Flite...
Hi,I'm having a problem with my Slinger park flyer. It uses a Hitec 555micro receiver, and two HS-55 micro servos. Everything was working fineuntil one of the servos started sticking, as if the gears inside itwere locking up. So I bought...
Ultimamente stavo pensado di andare a vedere un campo volo che si trovadalle mie parti.In particolar modo sono interessato agli elicotteri e volevo chiarirmi unpo' le idee.Ormai so già, dopo averlo letto e riletto sull'NG, che bisogna...
Salve a tutti. Vi scrivo perchè sono orientato ad acquistare un radiocomando...ho visto volare dei modelli di slow flyer e li ho trovati davverofantastici. Per quello che ne so (sono un principiante quasi assoluto)questi modelli non...
What is the current draw on the servo while running? Not just the idelcurrent.Know it will varry with load but a nominal value will be a good start.Tried the Futaba site to no avail.Thanks for any helpGary
I have been toying around with the idea of making an R/C boost glider outof a material called coroplast, its like box cardboard only its plastic, itwill be like a round flying wing design with flaperons. It will piggybackon a normal...